DC Surge Protective Device (DC SPD) is cost-effective and provides a solution to improve the system and eliminate any damage caused by surges. It is highly suitable for any facility. It can be used anywhere in the house for protection. These are installed on circuit breakers and automatic transfer switch for portable generator in residential homes and other places like pad-mounted transformers.
ZHEJIANG YUELONG offers and sells DC Surge Protective Device (DC SPD) in 2 categories: Type 2 and Type1+Type 2.
500VDC Type 2 Surge Protective Device PV DC SPD is installaed position in the total power supply DC circuit systems,direct/indirect lightning current or other transient over voltage protection.
In the most basic sense, when a transient voltage occurs on the protected circuit, an DC SPD limits the transient voltage and diverts the current back to its source or ground.
To work, there must be at least one non-linear component of the DC SPD, which under different conditions transitions between a high and low impedance state.
At normal operating voltages, the DC SPDs are in a high-impedance state and do not affect the system. When a transient voltage occurs on the circuit, the DC SPD moves into a state of conduction (or low impedance) and diverts the surge current back to its source or ground. This limits or clamps the voltage to a safer level. After the transient is diverted, the DC SPD automatically resets back to its high-impedance state.
High quality DC 3 phase Surge Arrester made in China.
DC 3 phase Surge Arresters protect against lightning surge voltages in solar system (photovoltaic power supply system).
These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.
High energy MOVs equipped with specific thermal disconnectors and related failure indicators.
China Quality DC Surge Protector Manufacturers and Suppliers.
DC surge protector is suitable for the new energy solar power generation system,working voltage of 500V,600V,800V,1000V.Installation position in the total power supply DC circuit systems,direct,indirect lightning current of lightning current or other transient over voltage protection.
Yuelong Electric(GHX) is a large-scale DC Surge Protector manufacturer and supplier in China. We have been specialized inDC Surge Protector for many years. Our products have a good price advantage and cover most of the Southeast Asia,India,Poland markets. We are looking forward to becoming your long-term partner.
High quality DC Surge Protection Device made in China.
DC Surge Protection device supplier is suitable for the new energy solar power generation system,working voltage of 1000V.Installation position in the total power supply DC circuit systems,direct,indirect lightning current of lightning current or other transient over voltage protection.
Yuelong Electric(GHX) is a large-scale DC Surge Protection device manufacturer and supplier in China. We have exported in the field of DC Surge Protection device for many years. Our GHX brand have a good price advantage and hot selling in the Southeast Asia,India,Poland markets. We look forward to becoming your long-term partner in China.
In an electrical systems, Solar DC SPDs are usually installed in tap-off configuration (in parallel) between the live conductors and the earth. The operating principle of Solar DC SPD can be similar to that of a circuit breaker.
In normal use (no overvoltage): the Solar DC SPD is similar to an open circuit breaker.
When there is an overvoltage: the Solar DC SPD becomes active and discharges the lightning current to earth. It can be likened to the closing of a circuit breaker which would short-circuit the electrical network with the earth via the equipotential earthing system and the exposed conductive parts for a very brief instant, limited to the duration of the overvoltage.
For the user, the operation of the Solar DC SPD is totally transparent as it only lasts a tiny fraction of a second.
When the overvoltage has been discharged, the Solar DC SPD automatically returns to its normal state (circuit breaker open).
