DC Surge Protective Device

Yuelong is a professional China DC surge protective device Manufacturers and China DC surge protective device suppliers. DC surge protective device is suitable for the new energy solar power generation system with the working voltage of 800V/1000V/1500V. DC surge protective device installation position is in the total power supply system of direct current circuit, to protect the indirect lightning current, DC surge protective device direct lightning current or other instantaneous overvoltage.
View as  
 
  • In the most basic sense, when a transient voltage occurs on the protected circuit, an DC SPD limits the transient voltage and diverts the current back to its source or ground.
    To work, there must be at least one non-linear component of the DC SPD, which under different conditions transitions between a high and low impedance state.
    At normal operating voltages, the DC SPDs are in a high-impedance state and do not affect the system. When a transient voltage occurs on the circuit, the DC SPD moves into a state of conduction (or low impedance) and diverts the surge current back to its source or ground. This limits or clamps the voltage to a safer level. After the transient is diverted, the DC SPD automatically resets back to its high-impedance state.

  • High quality DC 3 phase Surge Arrester made in China.
    DC 3 phase Surge Arresters protect against lightning surge voltages in solar system (photovoltaic power supply system).
    These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.
    High energy MOVs equipped with specific thermal disconnectors and related failure indicators.

  • China Quality DC Surge Protector Manufacturers and Suppliers.
    DC surge protector is suitable for the new energy solar power generation system,working voltage of 500V,600V,800V,1000V.Installation position in the total power supply DC circuit systems,direct,indirect lightning current of lightning current or other transient over voltage protection.
    Yuelong Electric(GHX) is a large-scale DC Surge Protector manufacturer and supplier in China. We have been specialized inDC Surge Protector for many years. Our products have a good price advantage and cover most of the Southeast Asia,India,Poland markets. We are looking forward to becoming your long-term partner.

  • High quality DC Surge Protection Device made in China.
    DC Surge Protection device supplier is suitable for the new energy solar power generation system,working voltage of 1000V.Installation position in the total power supply DC circuit systems,direct,indirect lightning current of lightning current or other transient over voltage protection.
    Yuelong Electric(GHX) is a large-scale DC Surge Protection device manufacturer and supplier in China. We have exported in the field of DC Surge Protection device for many years. Our GHX brand have a good price advantage and hot selling in the Southeast Asia,India,Poland markets. We look forward to becoming your long-term partner in China.

  • In an electrical systems, Solar DC SPDs are usually installed in tap-off configuration (in parallel) between the live conductors and the earth. The operating principle of Solar DC SPD can be similar to that of a circuit breaker.
    In normal use (no overvoltage): the Solar DC SPD is similar to an open circuit breaker. When there is an overvoltage: the Solar DC SPD becomes active and discharges the lightning current to earth. It can be likened to the closing of a circuit breaker which would short-circuit the electrical network with the earth via the equipotential earthing system and the exposed conductive parts for a very brief instant, limited to the duration of the overvoltage.
    For the user, the operation of the Solar DC SPD is totally transparent as it only lasts a tiny fraction of a second.
    When the overvoltage has been discharged, the Solar DC SPD automatically returns to its normal state (circuit breaker open).

  • Wholesale Low Price Surge Protection DC 2 Years Warranty made in China
    Buy quality factiory directly supply Surge Protection DC for us! Protect against lighting surge voltages in solar system( photovoltaic power supply system). These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the DC power supply line( solar panel side and inventer/converter side), especially if the line routing is external and long. High energy MOVs equipped with specific thermal disconnectors and related failure indicators.

We have DC Surge Protective Device made from our factory in China for our customers to choose from, which can be wholesale with discounts. Our high quality products are CE certified. Yuelong Electric is known as one of the famous DC Surge Protective Device manufacturers and suppliers in China. We can provide you with not only quality products with 2 Years Warranty, but also free sample, price list and quotation. In addition, we have many kinds of products in stock for you to buy at a low price. We look forward to cooperating with you, if you want to know more, you can consult us now, we will reply to you in time!